• Save energy through intelligent control of compressors.
• Low cost compressors system automation in modules.
• Controls compressors located at different places.
• Maintains network pressure in a narrow band.
• Visualisation of compressors and system status.
• On-line pressure trending.

• Controls all brands of Screw / Reciprocating Compressors
• Controls compressors with Pr.switch / Electronic control
• LCD Information Display
• System Pressure Display
  Compressor Status LEDs
• Configuration & Information Menus
• Pressure Band Setting
• Pressure Schedule Setting
• Day & Time Clock
• Compressor Operating Mode Selection
• Individual Compressor Information
• Power Failure Auto Restart
• Local Setting with 8 button keypad
• Diagnosis Menu

• Intelligent Sequence Control
• Pressure Band Control & Optimisation
• Off Peak Period Optimisation
• Control of VSD Compressor (Optional)

• Basic Compressor Control System : Enercon SX
• Remote Compressor Control : EX BOX
• PC Visualisation and Efficiency Report Generation : COMM / ANI BOX / Efficiency Report Generation  / EnterSoft Pro
• Basic Air System Monitoring : I/O , AX Box

• FIFO Rotation: Evenly distributes run-time between equivalent-size machines on a first-in, first-out schedule.
• Timer Rotation: Classical way to rotate compressors based on time. Compressors are assigned sequence designations and rotations takes place at a regularly specified interval.
• Energy Rotation: Automatically selects the lowest HP compressors capable of satisfying air needs.
• Running Hours Rotation : Equalises the run-time of all compressors in the network in accordance with assigned priorities. Ideal for systems where equal wear and tear is desired for all compressors in the system.
• Pyramid Mode : For large systems with necessity to define structured rotation groups like base and trim load.

With Exnercon SX in use, the pressure measurement at each individual compressor is replaced by one central and very precise pressure measurement by means of an electronic pressure sensor. The controller will, on the basis of the measured pressure, signal the compressors in the network to go on-load or off-load maintaining the net pressure in a narrow band resulting in energy savings.