FLUIDZONE

Home

Sitemap

TO KNOW MORE ABOUT CONTROL AIR

Godrej ControlAIR ^Tm -Demand Side Control Systems

Godrej AiRTM -is designed specifically to operate at the intermediate point of the compressed air system, i.e. on the downstream of the filter/dryer/receiver and upstream of the main piping distribution system .control air-creates storage by introducing a controlled differential pressure across an upstream receiver & itself.

This storage isolates the compressors from demand side. Peaks are dealt with by using the reserve energy in storage instead of additional horsepower thus allowing the compressors to run on no-load .Thus by providing air at controlled by differential and at an optimum pressure, mass of the air is reduced, which in turn results in the reduction in horsepower of air compressors.

Benefits

Energy savings between 7% to 25%
Constant Air Pressure throughout the plant
Artificial Demand Reduction
Reduced Compressed Air leaks
Satisfy Peak Demand with useful Storage
Improve product quality
Increase productivity
Reduction in comps operating & maintenance costs
100% depreciation under prevailing income tax laws
Payback between 7 to 22 months

Contol AiR

Every Industry has a problem of fluctuating air pressure. The end use applications of compressed air create fluctuations due to intermittent use of several equipments. Due to lag in the response from the compressor, the compressed air system is forced to operate for artificial demand & not for real demand. This leads to wastage of compressed air and inefficiency in production, which translates to higher energy cost. Isn't it time you controlled the cost of energy for compressed air?

Schematic Layout of a typical Compressed Air System showing location of ControlAiR

ControlAiR TM Models
Model Number	Max Flow (SCFM)
GS-05/GE-05	250
GS-10/GE-10	500
GE-20	1,000
GE-30	1,500
GE-40	2,000
GE-60	3,000
GE-90	4,500
GC-120	6,000
GC-150	7,500
GC-200	10,000

ControlAiR TM Feartures

· Option of Pneumatic or Electronic PID control
· Digital Electronic Closed Loop Feedback Control
· Digital display of Downstream & Target Pressure
· Pressure Display Precision of 0.01 kg/cm2
· Constant Pressure within 0.1 kg/cm2
· Optional Pressure Scheduling facility
· Option of Manual or Automatic Bypass
· Power Failure Auto Restart
· Minimal Pressure Drop across ControlAiR TM System
· Rugged Design to Suit tropical conditions
· Optional PC connectivity

Higher & intermediate flow/pressure capacity models of ControlAiR Downstream & Upstream Control Systems for special applications are built to meet specific customer requirement.
With our continuous development & improvement policy, specifications are subject to change without prior notice